BRP can-am RENEGADE 1000 2015 Operator'S Manual Download Page 29

Page: 29 / 156

OPERATION WARNINGS

WARNING

POTENTIAL HAZARD

Improperly crossing hills or turning on hills.

WHAT CAN HAPPEN

Could cause loss of control or cause vehicle to overturn.

HOW TO AVOID THE HAZARD

Never attempt to turn the vehicle around on any hill until you have mastered
the turning technique as described in this Operator's Guide on level ground.
Be very careful when turning on any hill.

Avoid crossing the side of a steep hill if possible.

When crossing the side of a hill:

Always follow proper procedures as described further in this Operator's
Guide.

Avoid hills with excessively slippery or loose surfaces.

Operator must shift weight to the uphill side of the vehicle.

________

SAFETY INFORMATION

________

Summary of Contents for can-am RENEGADE 1000 2015





























































































































































Search results

Summary of Contents for can-am RENEGADE 1000 2015

Reviews:

Related manuals for can-am RENEGADE 1000 2015

Brands by name

Popular brands

BRP can-am RENEGADE 1000 2015, Operator'S Manual

Search results

Summary of Contents for can-am RENEGADE 1000 2015

Reviews:

Related manuals for can-am RENEGADE 1000 2015

Brands by name

Popular brands