BRP can-am RENEGADE 1000 2015 Operator'S Manual Download Page 21

Page: 21 / 156

OPERATION WARNINGS

WARNING

POTENTIAL HAZARD

Attempting wheelies, jumps and other stunts.

WHAT CAN HAPPEN

Increases the chance of an accident, including an overturn.

HOW TO AVOID THE HAZARD

Never attempt stunts, such as wheelies or jumps. Do not try to show off.

WARNING

POTENTIAL HAZARD

Failure to inspect the vehicle before operating.

Failure to properly maintain the vehicle.

WHAT CAN HAPPEN

Increases the possibility of an accident or equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your vehicle prior to ride to make sure the vehicle is in safe
operating condition.

Always follow the maintenance schedule described in this Operator's
Guide.

________

SAFETY INFORMATION

________

Summary of Contents for can-am RENEGADE 1000 2015





























































































































































Search results

Summary of Contents for can-am RENEGADE 1000 2015

Reviews:

Related manuals for can-am RENEGADE 1000 2015

Brands by name

Popular brands

BRP can-am RENEGADE 1000 2015, Operator'S Manual

Search results

Summary of Contents for can-am RENEGADE 1000 2015

Reviews:

Related manuals for can-am RENEGADE 1000 2015

Brands by name

Popular brands