BRP Can-am MAVERICK Trail Sport T, Operator'S Manual

Page: 123 / 187

MAINTENANCE PROCEDURES
Battery Cleaning
Clean battery, battery casing and bat-
tery posts using a solution of baking
soda and water.
Remove corrosion from battery cable
terminals and battery posts using a
firm wire brush. Battery casing should
be cleaned by soft brush and baking
soda solution.
Battery Installation
Battery installation is the reverse of the
removal procedure.
NOTICE
Improper orientation of
the battery cables (reverse polarity)
will result in damage to the voltage
regulator.
NOTICE
Always connect RED (+)
cable first then BLACK (-) cable.
Fuses and Fusible Links
Fuse Replacement
If a fuse is burnt, replace it by one of the
same rating.
NOTICE
Do not use a higher rated
fuse as this can cause severe dam-
ages.
Fuse Box Location
The vehicle is equipped with two fuse
boxes. The front fuse box is located
under the LH dashboard and the rear
fuse box is located behind the driver
seat, near the ECM.
219002007-016_a
1. Front fuse box
219001880-045_a
1. Rear fuse box
NOTE: Fuse link 1 connected to bat-
tery positive post.
219002126-017
TYPICAL - REGULATOR FUSE HOLDER
Fuse Box Description
REGULATOR FUSE HOLDER
NO DESCRIPTION RATING
-
Regulator 50 A
______________
121