BRP Can-am MAVERICK Trail Sport T, Operator'S Manual

Page: 66 / 187

SECONDARY CONTROLS
219002128-006
KEYPAD
The keypad is used to navigate through
various menus and options. Refer to
7.6" DIGITAL DISPLAY .
6) 2WD/4WD Switch
The 2WD/4WD switch is located on
the upper console.
219002128-007
1. 2WD/4WD switch
This switch selects 2 wheel drive or 4
wheel drive mode when the vehicle is
stopped and the engine is running.
NOTICE
The vehicle must be
stopped to engage or disengage the
2WD/4WD switch. Mechanical dam-
age may occur if switch is engaged
or disengaged while driving.
The 4WD mode is engaged when the
switch is pushed upwards.
The 2WD mode is engaged when the
switch is pushed downwards. The ve-
hicle is then rear wheel drive only.
7) Rear Differential Lock
Switch (ABS models only)
The Differential lock switch is located
on the console.
219002128-008
1. Differential lock switch
The differential lock switch enables
locking of rear differential.
NOTICE
The vehicle must be
stopped to engage or disengage the
differential lock switch. Mechanical
damage may occur if switch is en-
gaged or disengaged while driving.
The rear differential is locked when
the switch is pushed upwards. The
rear differential is unlocked when the
switch is pushed downwards.
8) HDC (Hill Descent
Control) (ABS models
only)
219002128-009
1. HDC switch
64
______________