BRP Can-am MAVERICK Trail Sport T, Operator'S Manual

Page: 101 / 187

MAINTENANCE SCHEDULE
NOTE: Riding in a group in these conditions would increase even more the air filter
maintenance.
MAINTENANCE SCHEDULE LEGEND
Operation in trail riding conditions
Operation in severe riding conditions (dusty or muddy) or carrying heavy loads condition
MAINTENANCE SCHEDULE
Make sure to perform proper maintenance at recommended intervals as indicated
in the tables. Some items of the maintenance schedule must be performed in
function of the calendar, regardless of the distance or time of operation.
EVERY YEAR OR EVERY 3 000 KM (2,000 MI) OR 100 HOURS
(whichever comes first)
EVERY YEAR OR EVERY 1 500 KM (1,000 MI) OR 50 HOURS (whichever comes first)
Check fault codes
Perform all items indicated in the pre-ride inspection.
Replace engine oil and filter
Inspect gearbox oil level and look for contamination (every 3000 km)
Replace gearbox oil (Perform at the first 3000 km and then every 2 years or 6000 km)
Inspect and clean engine air filter. Replace if needed
Inspect steering system for abnormal play and damages (column, rack and pinion,
bellows)
Inspect the tie rod ends and ball joints for play and inspect boots condition
Inspect wheel bearings for abnormal play
Inspect suspension arm bushing and wear plates. Replace if needed.
Tighten rear upper A-arm fasteners
Inspect CV joints and rubber boots condition (check for abnormal play in the joints and
for cuts in the rubber boots)
Lubricate stabilizer bar bushings
Check the tightening torque of all suspension arm bolts and rear knuckle bolts. Tighten
to specification as required.
Tighten the rear shock absorber fasteners to specification every 3000 km (Maverick
Sport models)
Inspect and clean the brake system (fluid level, pads, discs, lines, calipers)
Check front differential oil level and look for contamination and overall condition (vents,
mount bolt torque, seals)
_______________
99