BW1253s User Guide v1.0
Nov. 2013
Page 44 of 180
VLAN ID and 802.1p tag must cooperate with remote Router or APC.
Interface priority –
specify the traffic priority for this SSID interface, which is implemented according
to 802.11e EDCA and makes sure the wireless downlink QoS. This priority is based on SSID, which
means different BSSID can have different traffic priority and the traffic of the same SSID has the
same priority
This traffic priority only makes sure the priority of downlink (from AP to wireless
client).
8 levels priorities are supplied. 1, 2, 0, 3, 4, 5, 6, 7 is from lowest priority to highest
priority.
And if no special QoS is needed, leave
priority
to default (0). 0 means Best Effort
priority.
WMM
–BW1253s support WMM wireless clients and implement WMM QoS with the WMM clients.
[enable]
ESS in Tunnel –
Settings for ESS in tunnel. When enabled, BW1253s setup tunnel with remote AC
for passing through layer3 network.
Remote Server IP
– IP address of remote AC product that setup tunnel with BW1253s
Figure 54 – Multiple BSSID Setting – 3
Security
– specify the security policy
WEP
– Wired Equivalent Privacy(WEP) is a security algorithm for IEEE 802.11 wireless networks.
