BW1253s User Guide v1.0
Nov. 2013
Page 33 of 180
Network | Tr069 Settings
TR-069 is the Broadband Forum technical specification entitled CPE WAN Management
Protocol(CWMP). It defines an application layer protocol for remote management of end-user devices.
As a bidirectional SOAP/HTTP-based protocol, it provides the communication between customer-
premises equipment(CPE) and Auto Configuration Servers(ACS server). It includes both a safe auto
configuration and the control of other CPE management functions within an integrated framework.
The protocol addressed the growing number of different internet access devices such as
modems,routers,gateways,set-top-boxes,and VOIP-phones for the end users. The TR-069 standard
was developed for automatic configuration of these devices with Auto Configuration Servers(ACS).
configure the remote management through TR069 ACS server(eg:BROWAN DMS server)
Figure 41 – TR-069 settings
Click Edit button and the similar page will be appeared.
Figure 42 – edit TR-069 settings
Status
– enable or disable TR-069 setting.[enable/disable]
ACS URL
– enter the ACS server URL.
ACS UserName
– the user name for AP register to ACS server.
ACS UserPassword
– the password for AP register to ACS server.
Enable Periodic Inform
– when AP registered to the ACS server, it will automatically send inform
message such as S/N,OUI,manufacturer and product name to the ACS server through TR-069
protocol in a periodic time.
Periodic Inform Interval
– the inform interval.[in seconds, the value is 720~4294967295]
Connection Request UserName
– when the ACS pulling a task to AP/CPE such as firmware
upgrade/downgrade, AP need the user name to verify the task sending from ACS server.
Connection Request Password
–when the ACS pulling a task to AP/CPE such as firmware
upgrade/downgrade, AP need the password to verify the task sending from ACS server.
