Brouwer 1570, Operator'S Manual

Page: 44 / 66

OPERATION
Roll-Up Flap Adjustment
The Roll-Up Flap determines the position of the flap
on the roll as it leaves the conveyor. The Flap
Adjuster is positioned by a threaded crank. The ‘roll-
up’ of the turf should be completed just as it leaves
the conveyor and should not require an extra turn.
If the roll is incomplete when the roll is discharged,
the roll-up flap adjuster should be moved back. The
up and down adjustment should be set so that the
flap adjuster just clears the mat.
If the adjustment of the roll-up flap adjuster does not
correct the flap position it may be necessary to
change the drive sprockets.
4-07
Roll Cross Conveyor
The Roll-Up Flap is correctly adjusted when the flap
on the roll is at position
‘A’ .
If the flap falls toward the conveyor, position ‘B’ ,
move the Flap Adjuster ‘FORWARD’ .
It the roll is not completed, move the adjuster
‘BACK’
The rubber belt cross conveyor has built-in sping
loaded belt tension. For service or repair see the
maintenance tips section.