Brother Work Smart MFC-J650dw, Basic User'S Manual

Page: 110 / 208

100
Data Remaining in
Memory
Print data is left in the machine's
memory.
Press . The machine will cancel
the job and clear it from the memory.
Try to print again.
Disc Jam [Front]
(MFC-J870DW)
The disc jammed while printing. The
Disc Tray was ejected from the front
of the machine. Remove the Disc Tray from the Disc
Guide.
(See
Disc Tray is jammed at the front
of the machine on page 127.)
Disc Jam [Rear]
(MFC-J870DW)
The disc jammed while printing. Make sure there is enough space
behind the machine.
Lift the scanner cover. Gently push
the Disc Tray toward the back of the
machine and remove the Disc Tray.
(See
Disc Tray is jammed at the back
of the machine on page 127.)
Disc Tray did not Feed
(MFC-J870DW)
The Disc Tray is not inserted into the
Disc Guide. After placing a disc on the Disc Tray,
insert the Disc Tray into the Disc
Guide and line up the triangular
marks. Press
RestartPrinting
.
Disc Tray hit at back
of machine
(MFC-J870DW)
There is not enough space behind the
machine for the Disc Tray to feed.
The Disc Tray was ejected from the
front of the machine. Remove the Disc Tray from the Disc
Guide.
(See
Disc Tray is jammed at the front
of the machine on page 127.)
The Disc Tray is stuck inside the back
of the machine. Make sure there is enough space
behind the machine.
Lift the scanner cover. Gently push
the Disc Tray toward the back of the
machine and remove the Disc Tray.
(See
Disc Tray is jammed at the back
of the machine on page 127.)
Disconnected
The other person or other person's
fax machine stopped the call. Try to send or receive again.
If calls are stopped repeatedly and
you are using a VoIP (Voice over IP)
system, try changing the
Compatibility to Basic (for VoIP). (See
Telephone line interference / VoIP
on page 140.)
Document Jam/too Long
The document was not inserted or fed
correctly, or the document scanned
from the ADF was too long. (See Using the ADF on page 32.)
(See Document jam on page 112.)
Error Message Cause Action