Brother ULT-2001 Operation Manual Download Page 212

Page: 212 / 319

Embroidery

5-37

1 —

2 —

3 —

4 —

5 —

6 —

7 —

8 —

9 —

CONTENTS

Index

5. Press

, or

, to move the needle back

2-3 stitches before the spot where the thread broke.

* Press

, or

to move the pattern back

the number of stitches shown on the key without sew-
ing.

* Press

, or

to move the pattern for-

ward the number of stitches shown on the key without
sewing.

* Press

to move to the beginning position of the

present color (character) without sewing.

* Press

to move to the beginning position of the

next color (character) without sewing.

* Press

to return to the original screen.

If you can not move back to the spot where the thread

broke, press

to move to the beginning position

of the selected color, then use

, or

to move ahead to slightly before where the thread
broke.

6. Lower the presser foot lever, and press the “Start/Stop”

button to continue sewing.

Summary of Contents for ULT-2001
































































































































































































































































































































Search results

Summary of Contents for ULT-2001

Reviews:

Related manuals for ULT-2001

Brands by name

Popular brands

Brother ULT-2001, Operation Manual

Search results

Summary of Contents for ULT-2001

Reviews:

Related manuals for ULT-2001

Brands by name

Popular brands