Brother TD-4000, User Manual

Page: 8 / 80

Introduction 2
Read and understand all of these instructions and save them for later reference. Follow
all warnings and instructions marked on the product.
The symbols used in this guide are as follows:
„
To use the machine safely
WARNING
Tells you what to do to avoid the risk of injury.
CAUTION
Tells you about procedures you must follow to prevent damage to the machine.
Action NOT allowed to do DO NOT disassemble the product.
DO NOT splash the product with or
immerse the product in water. DO NOT touch a given portion of the
product.
Mandatory action Unplugging
Alerts to the possibility of electrical
shock
WARNING
Follow these guidelines to avoid fire, electric shock, or other damage.
„
The Machine
Unplug the power cord immediately and
stop using the machine during an
electrical storm. There may be a remote
risk of electric shock from lightning.
Do not touch any metal parts near the
print head. The print head becomes very
hot during use and remains very hot
immediately after use. Do not touch it
directly with your hands.
Dispose of plastic bags correctly and
keep away from babies and children. Do
not wear or play with plastic bags.
Unplug the power cord immediately and
stop using the machine if you notice any
abnormal odor, heat, discoloration,
deformation or anything unusual whilst the
machine is in use or storage.
Do not disassemble the machine.
For inspection, adjustment and repair of
the machine contact the retail outlet
where the machine was purchased or
your local authorized service center. Do not drop, hit or otherwise bang the
machine.
Do not hold and lift the machine by the
RD Roll cover. The cover could come off
and the machine could fall and become
damaged.
Do not allow the machine to get wet in any
way.
Do not use the machine with foreign
objects in it. If water or any foreign
objects should enter the machine,
unplug the power cord from the electric
outlet and remove the foreign object. If
necessary, contact the retail outlet
where the machine was purchased or
your local authorized service center.
Do not hold the machine with only one
hand. The machine may slip out of your
hand.
Never disassemble the machine or allow
it to get wet to avoid possible fire or
electrical shock. Doing so could cause
an electrical shock or fire.
Safety Precautions