Brother SCANNERII, Operation, Service Manual & Parts List

Page: 2 / 16

- 1 -
Table of Contents
∗
Service Manual
I
. Main Configuration.......................................................................... 2
II . Disassembling the SCANNER ........................................................ 5
III . Setting the Scanner Adjustment and Test Mode .......................... 7
IV
. Diagnosing a Breakdown in the Electrical System ...................... 9
∗
Parts List ..................................................................................................... 13
n
GENERAL INFORMATION
This service manual has been compiled for explaining repair procedures of the SCANNER.
This was produced based on up-to-date product specifications at the time of issue, but there may have
been changes of specifications for the purpose of improvements.
Contact manufacturer or local sales company for information concerning such changes.
l
CAUTION
l
1. Always use rubber gloves when handling printed circuit boards and never touch the metal portion of a
printed circuit board with bare hands.
2. Keep your body earthed in order to avoid generating static electricity.
3. Pack printed circuit boards in aluminum foil and avoid subjecting them to any form of impact during
storage or transportation.
4. Do not touch or damage the metal portion of a printed circuit board with a screwdriver or any other tool
while making repairs or the like.
www.promelectroavtomat.ru