Brother SCANNERII, Operation, Service Manual & Parts List

Page: 6 / 16

- 5 -
II . Disassembling the SCANNER
•
Remove the scanner guide cover.
‚
Remove the cover from the battery compartment, and take out the six batteries. (Skip this step if there
are no batteries in the compartment.)
ƒ
Remove the four screws from the bottom of the compartment, lift up the main body of the scanner, and
remove the two connectors.
„
Remove the four screws securing the main PC board assembly and take out the assembly.
…
Disconnect the scanner connector from the main PC board assembly.
†
Remove the cord guide from the main body of the scanner, and disconnect the scanner connector from
the main body.
‡
Remove the four screws that secure the LCD module to the main body of the scanner, and take off the
LCD module.
ˆ
Remove the four screws that secure the battery holder to the main body, and take off the battery holder.
Fig. 1 Connecting the LCD module leads to the main PC board assembly
Fig. 2 Arranging the cables for the Scanner B5N-1771
www.promelectroavtomat.ru