14
e
The operation is finished when “OK” appears.
If “NG” appears, remove the sticker, and then
follow the on-screen instructions to repeat
steps 3 and 4 of Step
. If multiple attempts
to set the position are not successful, contact
your nearest Brother dealer.
f
Remove the sticker, and then turn off the
machine.
Practice (Connecting Three Patterns)
In order to practice aligning pattern edges by using the
camera, we will connect three patterns as shown
below.
A : First pattern
B : Second pattern
C : Third pattern
a
Press
in the Embroidery Edit screen,
select the pattern shown below, and then
press .
b
Thread the machine with the upper thread
and the bobbin thread.
Note
• When using the camera to connect patterns, use the
needle that was installed when the camera needle
position was set.
