20
r
Before embroidering, press
to display
the pattern connection setting screen (screen
for connecting the selected pattern to the
next one) appears. Select the reference edge
and reference point for connecting the
second and third patterns, and then press
. In this example, we will select the
bottom point of the right edge.
a
Reference edge and reference point
s
Lower the presser foot, and then embroider
the second pattern.
t
Follow the on-screen instructions to perform
steps
.
u
While making sure that the positioning
stickers do not peel off, rehoop the fabric so
that the next pattern and the centers of the
large circles of the two stickers are within the
embroidering area. Check with the
embroidery sheet. After checking, attach the
embroidery frame to the machine.
a
Pattern to be embroidered next
b
Centers of large circles for stickers
c
Embroidery sheet
Note
• Before embroidering, select the reference edge and
reference point of the selected pattern for
connecting the next pattern.
Once the pattern has been embroidered,refer to
“TROUBLESHOOTING” on page 36.
a
Note
• If the machine is stopped and
is pressed while
embroidering or after embroidering has begun, the
reference edge and reference point for connecting
the next pattern can be set.
