Brother QL-1060N, Setup & Operation Manual

Page: 17 / 121

15
STEP
1
STEP
2
STEP
3
For Wi
ndows
®
For M
acintosh
®
STEP
4
Getting start
ed
Re
ference
Insta
lling
the Software
Label Over
view
Introdu
ction
Re
ference
„ Installing the BRAdmin Light configuration utility for Windows
BRAdmin Light is a utility for the initial setup of Brother network connected devices. It can
also search for Brother products on your network, view the status and configure basic
network settings, such as IP address.
For more information on BRAdmin Light, visit us at http://solutions.brother.com.
„ Setting your IP address, Subnet Mask and Gateway using
BRAdmin Light
•
If you require more advanced printer management, use the latest Brother BRAdmin
Professional utility version that is available as a download from
http://solutions.brother.com.
•
If you are using Personal Firewall software (e.g. Windows Firewall), BRAdmin Light
may fail to detect the unconfigured device. In that case, disable your Personal
Firewall software, try BRAdmin Light again. Re-start your Personal Firewall
software after the address information is set.
1
Click Utility Installation.
This screen is the same screen as you
see when you insert the CD-ROM.
2
Click BRAdmin Light and follow the on-
screen instructions.
If the Windows Firewall is enabled on your PC,
the message “Do you wish to add this application
to the list of exceptions?” appears. Check your PC
environment and choose Yes or No.
1
Start BRAdmin Light. It will search for new
devices automatically.
If you have a DHCP/BOOTP/RARP server in your
network, you don’t have to do the following
operation, as the print server will automatically
obtain its IP address.