Brother PEDESIGN PLUS Operation Manual Download Page 66

Page: 66 / 80

Supplement

■

Quick Access Toolbar

Click

Customize

Repeat the following operations until the
desired commands are displayed.

(1)

Choose commands from

: selector

Select a command category.

(2)

Commands

: list

Select the command to be added.

(3)

Add

button

Selected command is added.
The command appears in (A).

(4)

Remove

button

Selected command is removed.
The command is removed from (A).

(5)

Select an icon in (A), and then click the
buttons at to move it to the desired
position.

(6)

Reset

button

Reverting to the default commands.

Settings for the following can also be specified
from this dialog box.

(7)

Show Quick Access Toolbar Below the
Ribbon

Select where the Quick Access Toolbar is
displayed. Select the check box to display
the Quick Access Toolbar below the
Ribbon.

(8)

Keyboard shortcuts

Click

Customize

to customize shortcut

keys.

“Shortcut keys” on page 64

After the settings have been specified, click

to apply them.

■

Shortcut keys

Click

Customize

, then

Customize

(8).

In the

Categories

list, select a command

category. Then, in the

Commands

list, select

the command whose shortcut keys are to be
specified.



The default shortcut keys appear in the

Current Keys

box (1).

Use the keyboard to record the new shortcut
keys in the

Press new shortcut key

(2) box,

and then click

Assign

(4). The new shortcut

keys appear in the

Current Keys

box (1).



Usage information about the entered key
combination appears. If the key
combination has already been assigned
to another command, the name of that
command appears at (3).

To remove the default or specified shortcut
keys, select the shortcut keys in (1), and then
click

Remove

(5).

To revert to the default settings, click

Reset

All

(6).

Repeat steps 2 and 3 until the desired shortcut
keys have been specified for the commands,
and then click

Close

Click

in the

Options

dialog box.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(A)

(8)

(1)

(4)

(5)

(6)

(3)

(2)

XE8656-001.book Page 64 Thursday, June 30, 2011 2:56 PM

Summary of Contents for PEDESIGN PLUS

















































































Search results

Summary of Contents for PEDESIGN PLUS

Reviews:

Related manuals for PEDESIGN PLUS

Brands by name

Popular brands

Brother PEDESIGN PLUS, Operation Manual

Search results

Summary of Contents for PEDESIGN PLUS

Reviews:

Related manuals for PEDESIGN PLUS

Brands by name

Popular brands