X
Preview
• Pressing the Preview key displays a preview of
the label, and may differ from the actual one
when printed.
• If the LCD cannot display all the text at once,
press
/
to display the hidden text.
• Press
/
/
to exit Preview
mode.
X
Feeding (Tape Feed)
• This function feeds approximately 1" (25mm) of
blank tape.
• Do not pull uncut tape from the Tape Cassette
as this may damage the Tape Cassette.
X
Printing
Press the Print key to print the text displayed on
the LCD.
X
Printing Multiple Copies
• You can print up to nine copies of each label.
• DO NOT touch the Tape Cutter Lever while the
message [
Please Wait
] appears on the LCD.
•
To cut tape:
When printing ends, push the
Tape Cutter Lever after the message [
Please
Cut
] appears.
• To remove tape backing, fold the tape
lengthwise (with the text facing inward), to
expose the inside edges that run down the
center of the tape backing. Peel and apply.
X
Setting Margins
[
Full
] / [
Half
] / [
Narrow
]
Use one of these options to customize margin
length before and after your text.
The printed dots (:) indicate the end of the label.
Cut along the printed dots (:) with scissors.
[
Chain Print
]
(tape-saving option)
Use this option to print multiple different labels
with narrow margins. This option saves tape.
1.
Enter your text.
2.
Press .
3.
When [
Feed OK?
] appears on the LCD, press
to change the text.
4.
Clear the text, enter the text you want on the
next label, and then press
.
5.
After your last label prints, when [
Feed OK?
]
appears on the LCD, press
.
NOTE
• When you use [
Chain Print
], feed the tape
before using the cutter (
+
), otherwise
part of the text may be cut off.
• Do not pull the tape, as this may damage the Tape
Cassette.
• The printed dots (:) indicate the end of the label. Cut
along the printed dots (:) with scissors.
Printing Labels
+
+
[
Copies:
]
/
/
-
/
[
Margin
]
/
[
Full
/
Half
/
Narrow
/
Chain
]
LCD
Printout
Full
Half
Narrow
2.7"
ABC
1"
1"
1.6"
ABC
0.47"
0.47"
1.0"
ABC
0.16"
0.16"
