LABEL APPLICATION KEYS
Use this function to create a label
that can be wrapped around a
cable or wire.
Turn on the Cable Rotate/Repeat function to print
text repeatedly along the length of the label so
that it can easily be read from any angle.
• To activate the Text Repeat function, press
and then select [
CableRot
/
Rpt
].
• Cable diameter: 0.2" to 3.6" (3mm to 90mm)
Default: 0.3" (6mm)
Use this function to create a
label that can be wrapped
around a cable or wire with its
ends applied together to form a
flag.
Specify the length you want, or select [
Auto
] to
automatically adjust the flag length according to
the text length.
• Flag length: 0.4" to 8.0" (10mm to 200mm), Auto
Default: Auto
• Use the Cable Flag function when the diameter
of the object is more than 0.2" (3mm).
• Text cannot be rotated when using the Cable
Flag function.
NOTE
• We recommend using Brother Flexible ID Tape for labels attached to cables and wires.
• To cancel the Cable Wrap/Cable Flag/Faceplate functions during operation, press
/
or
accordingly.
• Depending on the format you select, the entire contents of your text may not be printed. For example, if the
text is too long to fit into the format, the [
Text Limit
!] error message will appear.
3
Cable Wrap
[
Txt Rpt: Off
]
[
Txt Rpt: On
]
/
(
Select a cable diameter
)
(
Enter text
)
Cable Flag
/
(
Select a flag length
)
(
Enter text
)
