HELPFUL HINTS
Reset your P-touch ribbon/tape printer when you want
to initialize the settings, or in the event it is not working
properly. Resetting clears all the text, settings, and
stored files.
1
Turn off the P-touch ribbon/tape printer,
hold down
and
, and then press
to turn the P-touch ribbon/tape printer back
on.
2
First release the power button, and then
release
and
.
The P-touch ribbon/tape printer turns on with
the internal memory reset.
NOTE
Shortcuts
File
Tab
Unit
LCD Contrast
Ribbon/Tape Length
Margin
Tab Length
Clear
Language
Helpful Tips
Clear
Feed
Print Options
Resetting the P-touch
5
If you have questions or need information
about your Brother product, please visit us
online or call.
For FAQs, Troubleshooting, and to download
software and manuals, visit
support.brother.com.
To order supplies and accessories, visit
www.brothermall.com or call
1-877-552-6255.
For USA Customer Service, call
1-877-BROTHER (1-877-276-8437)
Fax: 1-901-379-1210
CAUTION
USING A COMBINATION OF DIFFERENT
BATTERIES (SUCH AS ALKALINE WITH
Ni-MH) , MAY RESULT IN AN EXPLOSION.
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
• Remove the batteries if you do not intend to
use the ribbon/tape printer for an extended
period of time.
• Dispose of batteries at an appropriate
collection point, not in the general waste
stream. Be sure to observe all applicable
federal, state, and local regulations.
• When storing or discarding a battery, wrap
it with cellophane tape to prevent it from
short-circuiting. (see illustration)
1. Cellophane tape
2. Alkaline or Ni-MH
battery
Do not mix old and new batteries. Replace all
six batteries at the same time.
2
1
