Brother MFC-J6910DW User Manual Download Page 232

Page: 232 / 271

Chapter 7

2 in 1 ID Copy

You can copy both sides of your identification
card onto one page, keeping the original card
size. Make sure the paper size is set to Letter
or A4.

Note

You can copy an identification card to the
extent permitted under applicable laws.
See

Legal limitations for copying

in the

Safety and Legal Booklet

Press (

COPY

Place your identification card face down
at the left corner of the scanner glass.

1 0.12 in. (3 mm) or greater (top, left)

Enter the number of copies you want.

Press

to display

Page Layout

Press

Page Layout

Press

to display

2 in 1 (ID)

Press

2 in 1 (ID)

Press

Black Start

Color Start

The machine starts scanning the first
page.

After the machine copies the one side,
press

Yes

. Turn over the identification

card and press

Black Start

Color Start

to scan the another side.

Note

•

Watermark Copy

Book Copy

Sort

Duplex Copy

Thin Paper Copy

Ink Save Mode

and

Enlarge/Reduce

are not available with

2 in 1 (ID)

• If you are producing multiple color copies,

2 in 1 (ID) copy is not available.

Sorting copies using the ADF

You can sort multiple copies. Pages will be
stacked in the order 321, 321, 321, and so on.

Press (

COPY

Load your document.

Enter the number of copies you want.

Press

to display

Stack/Sort

Press

Stack/Sort

Press

Sort

If you do not want to change additional
settings, press

Black Start

Color Start

Note

Fit to Page

Page Layout

and

Book Copy

are not available with

Sort

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for MFC-J6910DW
















































































































































































































































































Search results

Summary of Contents for MFC-J6910DW

Reviews:

Related manuals for MFC-J6910DW

Brands by name

Popular brands

Brother MFC-J6910DW, User Manual

Search results

Summary of Contents for MFC-J6910DW

Reviews:

Related manuals for MFC-J6910DW

Brands by name

Popular brands