Brother MFC-J625DW Basic User'S Manual Download Page 74

Page: 74 / 144

Gently push the back of the ink cartridge
marked “PUSH” until it clicks, and then
close the ink cartridge cover.

The machine will automatically reset the
ink dot counter.

Note

• If you replaced an ink cartridge, for

example Black, the LCD may ask you to
verify that it was a brand new one (for
example,

Did You Change

Black

For each new cartridge you installed,
press

Yes

to automatically reset the ink

dot counter for that colour. If the ink
cartridge you installed is not a brand new
one, be sure to press

• If the LCD shows

No Ink Cartridge

Cannot Detect

after you install the ink

cartridges, check that the ink cartridges
are brand new Original Brother and that
they are installed correctly.

IMPORTANT

• DO NOT take out ink cartridges if you do

not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink
left in the cartridge.

• DO NOT touch the cartridge insertion

slots. If you do so, the ink may stain your
skin.

• If ink gets on your skin or clothing

immediately wash it off with soap or
detergent.

• If you mix the colours by installing an ink

cartridge in the wrong position, clean the
print head several times after correcting
the cartridge installation.

• Once you open an ink cartridge, install it in

the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written on
the cartridge package.

• DO NOT dismantle or tamper with the ink

cartridge; this can cause the ink to leak out
of the cartridge.

Summary of Contents for MFC-J625DW

















































































































































Search results

Summary of Contents for MFC-J625DW

Reviews:

Brands by name

Popular brands

Brother MFC-J625DW, Basic User'S Manual

Search results

Summary of Contents for MFC-J625DW

Reviews:

Brands by name

Popular brands