![Brother MFC-J245 Basic User'S Manual Download Page 99](http://html.mh-extra.com/html/brother/mfc-j245/mfc-j245_basic-users-manual_54234099.webp)
Troubleshooting
91
B
Dial Tone detection
B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection
, you can make your machine
dial as soon as it detects a dial tone. This
setting can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems when dialling, you should change it
back to the
No Detection
setting.
a
Press
Menu
,
0
,
4
.
b
Press
a
or
b
to choose
Detection
or
No Detection
.
Press
OK
.
c
Press
Stop/Exit
.
Telephone line
interference / VoIP
B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, you can change the
compatibility setting which reduces the
modem speed to minimise errors.
a
Press
Menu
,
0
,
5
.
b
Press
a
or
b
to choose
Normal
or
Basic(for VoIP)
.
Press
OK
.
Basic(for VoIP)
cuts the
modem speed to 9,600 bps and
turns off colour fax receiving and
ECM, except for colour fax-sending.
Unless interference is a recurring
problem on your telephone line, you
may prefer to use it only when
needed.
To improve compatibility with most
VoIP services, Brother recommends
changing the compatibility setting to
Basic(for VoIP)
.
Normal
sets the modem speed at
14,400 bps.
c
Press
Stop/Exit
.
NOTE
• VoIP (Voice over IP) is a type of phone
system that uses an Internet connection,
rather than a traditional phone line.
• Brother does not recommend the use of a
VoIP line. VoIP limitations in general can
cause some functions of the fax machine
not to work correctly.