Brother MFC-9870, Owner'S Manual

Page: 71 / 170

63
Q U I C K - D I A L N U M B E R S A N D D I A L L I N G O P T I O N S
Dialling Options
When you dial an auto dial number, the screen displays the name you’ve
stored, or, if you haven’t stored a name, the fax number you’ve stored.
Searching the Telephone Index
You can search for names you have stored in One Touch and Speed Dial
memories. Names are stored alphabetically.
1
Insert the document(s) in the feeder, or on the glass platten.
2
Press Tel-Index , then enter the first letter of the name you’re
looking for.
3
Press or to search the memory.
4
When the screen displays the name you want to call, press Start to
begin dialling.
One Touch Dialling
1
Insert the document(s) in the feeder, or on the glass platten.
2
Press the One Touch key of the location you want to call.
3
Press
Start
.
If you try to use a One Touch or Speed Dial location with no number
stored in it, you hear a warning sound, and screen displays NOT
ASSIGNED. The display returns to normal after 2 seconds.
Speed Dialling
1
Insert the document(s) in the feeder, or on the glass platten.
2
Press
Speed Dial
, then press the two-digit Speed Dial number.
3
Press Start .
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
If your MFC is connected to a PABX, you may need to insert an
additional number prefix (e.g. “9”) and a “pause” before each fax or
telephone number to gain access to the outside line. When you press
Redial/Pause
, a dash “-” will appear on the display. By storing a pause,
you can create a delay of 3.5 seconds.