manualshive.com logo in svg

Brother MFC-9870, Owner'S Manual

Share
Download
Brother MFC-9870 Owner'S Manual Download Page 17

9

M F C

S E T U P

A N D

C O N N E C T I O N S

Caution

1

We recommend that this product be used with a surge protection
device to protect the product against damage caused by a lightning
strike.

2

Never touch telephone wires or terminals that are not insulated
unless the telephone line has been disconnected at the network
interface.

3

Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.

4

Do not use the telephone to report a gas leak in the vicinity of the
leak.

Release the scanner lock lever

The blue scanner lock lever is on the left side of the MFC. Push the lever
up to unlock the scanner.

 Lock      Unlock

Scanner Lock Lever

Caution

If CHECK SCAN LOCK appears on the LCD, immediately release the
scanner lock lever. If you see MACHINE ERROR AF (or AE), stop
operation and contact your Brother dealer for service.

Summary of Contents for MFC-9870











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands