manualshive.com logo in svg

Brother MFC-9750, Owner'S Manual

Share
Download
Brother MFC-9750 Owner'S Manual Download Page 68

62

C H A P T E R

E I G H T

Bi-directional Parallel Ports (nibble and byte
modes)

The machine supports both nibble (AT) and byte (Bi-directional) mode
parallel ports. If your PC supports byte mode, scanning and fax reception
will be at a faster speed. To verify or change the parallel port mode,
please check your system BIOS in the CMOS Setup or contact your
computer manufacturer for assistance.

Some older PC models support only nibble mode. Generally, newer
models support both nibble and byte modes.

The Machine Connect Failure or Bi-directional
Communication Error

Recently, some printers have included a function to show the printer
status on the PC display. Such printers use the bi-directional
communication parallel port between the printer and the PC. Our
machine also has a bi-directional parallel port function. Since Windows

®

3.xx does not support bi-directional communication on the parallel port,
each peripheral vendor has developed and supplies their own bi-
directional device driver, which will be installed into Windows

®

 3.xx. If

you install two or more different bi-directional device drivers into
Windows

®

, they might conflict with each other and cause some

problems.

Please make sure you have installed the machine driver by running
SETUP.EXE from your CD-ROM drive, as instructed on the CD-ROM
label. The bi-directional communication may be disabled when the driver
is installed from Add menu in “Printers” of Control Panel. Please restart
Windows

®

 after installing the drivers.

Remove the conflicting situation caused by one of the following printer
drivers. Review the following sections that apply to any additional
printer drivers you may have installed into your Windows

®

 software.

Brother HL-6/6V/10h/630series/660series/960/1260/WL-660
HP LaserJet series II, IID, IIP, IIP+, III, IIID, IIIP or IV Plus
NEC SuperScript 610/660
EPSON ActionLaser 1100/1400
LexMark WinWriter 200

Brother HL-6/6V/10h/630series/660series/960/1260/
WL-660:

The Resource Manager for the machine may not work if the printer
driver for the above models is installed after the installation of the
machine printer driver.

Summary of Contents for MFC-9750

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands