Brother MFC-9750, Owner'S Manual

Page: 39 / 96

33
S E T T I N G U P T H E M A C H I N E A N D C O M P U T E R T O W O R K T O G E T H E R
If you are using Windows
®
95, after you connect Brother machine to
Computer. you may see “New Hardware Found Brother MFC-9750”
during startup.
You can select “Do not install a driver (Windows ® will not prompt you
again).” and click OK, so Windows
®
will not display this dialog box
again
—OR—
If you see “Update Device Driver Wizard”, Click Next to bypass the
Windows
®
Plug and Play Printer Driver screens, followed by Finish.
If you are using Windows
®
98, you may see the “Add New Hardware
Wizard” during startup, follow the instructions from the installer, then
click Next. Click Finish when it appears on the screen.
Installing MFC-9750 Printer Driver
If you are using Windows NT ® Workstation Version 4.0:
1
Insert the CD-ROM for the MFC-9750 printer driver into your CD-
ROM Drive.
2
Click the Start button in the Task bar.
3
Select Run.
4
Enter X:\winnt\setup (where X is your CD-ROM Drive).