manualshive.com logo in svg

Brother MFC-9750, Owner'S Manual

Share
Download
Brother MFC-9750 Owner'S Manual Download Page 58

52

C H A P T E R   S E V E N

For Your  Safety

To ensure safe operation the three-pin plug supplied must be inserted
only into a standard three-pin power point which is effectively grounded
through the normal household wiring.

The fact that the equipment operates satisfactorily does not imply that
the power is grounded and that the installation is completely safe. For
your safety, if in any doubt about the effective grounding of the power,
consult a qualified electrician.

IEC 825 Laser Class

CLASS 1 LASER PRODUCT.

Disconnect device

The equipment must be installed near the socket outlet which must be
easily accessible.

IMPORTANT

If the socket outlet is not compatible with the mains plug as fitted, then
remove the plug from the mains cord and fit an appropriate three pin
plug. If the replacement plug is intended to take a fuse then fit with the
same fuse rating as the original.

If a moulded plug is severed from the power cord then it should be
destroyed because a plug with cut wires is dangerous if plugged into a
live socket outlet. Do not leave it where a child might find it.

In the event of replacing the plug fuse, fit a fuse approved by ASTA to
BS1362 with the same rating as the original fuse.

Always replace the fuse cover. Never use a plug with the cover omitted.

WARNING - THIS PRINTER MUST BE PROPERLY EARTHED.

The wires in the supplied main cord are the following colours.

Green and yellow: Ground

Blue:

Neutral

Brown:

Live

Summary of Contents for MFC-9750

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands