Brother MFC-9320CW, Quick Setup Manual

Page: 10 / 49

10
12
Set the telephone line
type
If you are connecting the machine to a line that
features a PABX (PBX) or ISDN to send and receive
faxes, it is also necessary to change the phone line
type accordingly by completing the following steps.
a
Press Menu , 0 , 6 .
Initial Setup
6.Phone Line Set
b
Press
a
or
b
to choose
PBX
,
ISDN
or
Normal
.
Press OK .
Do one of the following:
 If you choose
ISDN
or
Normal
, go to step
f
.
 If you choose
PBX
, go to step
c
.
c
Do one of the following:
 If you want to change the current prefix
number, press
1 and go to step
d
.
 If you do not want to change the current
prefix number, press
2 and go to step
f
.
d
Enter the Prefix number (up to 5 digits) on the
dial pad, and then press
OK .
e
Press
a
or
b
to choose
On
or
Always
and
press OK .
f
Press Stop/Exit .
Note
The default setting is “!”. When you press Tel/R ,
“!” will be displayed on the LCD.
Note
You can use the number 0 to 9, #,
l
and !. (Press
Tel/R to display “!”.)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed break
recall, press
Tel/R to enter the break.
Note
• If you choose
On
, pressing Tel/R (the screen
displays “!”) will let you access an outside line.
• If you choose
Always
, you can access an
outside line without pressing Tel/R .
Note
PBX and TRANSFER
The machine is initially set to
Normal
, which lets
the machine connect to a standard PSTN (Public
Switched Telephone Network) line. However,
many offices use a central telephone system or
Private Automatic Branch Exchange (PABX).
Your machine can be connected to most types of
PABX (PBX). The machine’s recall feature
supports timed break recall only (TBR). TBR will
work with most PABX (PBX) systems allowing
you to gain access to an outside line, or transfer
calls to another extension. The feature works
when
Tel/R is pressed.