manualshive.com logo in svg

Brother MFC-9120CN, User Manual, Page: 158 / 264

Share
Download
Brother MFC-9120CN User Manual Download Page 158

142

Cooling Down

Wait for a while

The temperature of the drum unit 
or toner cartridge is too hot. The 
machine will pause its current 
print job and go into cooling down 
mode. During the cooling down 
mode, you will hear the cooling 
fan running while the LCD shows 

Cooling Down

, and 

Wait for a while

.

Make sure that you can hear the fan in the 
machine spinning and that the exhaust outlet 
is not blocked by something.

If the fan is spinning, remove any obstacles 
that surround the exhaust outlet, and then 
leave the machine turned on but do not use 
it for several minutes.

If the fan is not spinning do the following:

Disconnect the machine from the power for 
several minutes, then reconnect it. (The 
machine can be turned off for approximately 
4 days without losing faxes stored in the 
memory. See 

Transferring your faxes or Fax 

Journal report

 on page 147.)

Comm.Error

Poor telephone line quality 
caused a communication error.

Send the fax again or connect the machine 
to another telephone line. If the problem 
continues, call the telephone company and 
ask them to check your telephone line.

Connection Fail

You tried to poll a fax machine 
that is not in Polled Waiting mode.

Check the other fax machine’s polling setup.

Cover is Open

The ADF cover is not closed 
completely.

Close the ADF cover of the machine, then 
press 

Stop/Exit

.

The top cover is not closed 
completely.

Close the top cover of the machine.

Cover is Open

The fuser cover is not closed 
completely or paper was jammed 
in the back of the machine when 
you turned on the power.

„

Close the fuser cover of the machine.

„

Make sure paper is not jammed inside 
the back of the machine, and then close 
the fuser cover and press 

Black Start

 or 

Color Start

.

DIMM Error

The DIMM is not installed 
correctly. Or the DIMM is broken.

Turn off the machine. Re-install the DIMM 
correctly. Wait a few seconds, and then turn 
it on again. If this error message appears 
again, replace the DIMM with a new one. 
(See 

Installing extra memory

 on page 122.)

Disconnected

The other person or other 
person’s fax machine stopped the 
call.

Try to send or receive again.

Document Jam

The document was not inserted 
or fed properly, or the document 
scanned from the ADF was too 
long.

See 

Document jams

 on page 148 or 

Using 

the automatic document feeder (ADF)

 

on page 23.

DR Mode in Use

The machine is set to Distinctive 
Ring mode. You cannot change 
the Receive Mode from Manual to 
another mode.

Set Distinctive Ring to 

Off

. (See 

Turning off 

distinctive ring

 on page 56.)

Error Message

Cause

Action

Summary of Contents for MFC-9120CN









































































































































































































































































Reviews:

No comments