Brother MFC-9120CN User Manual Download Page 117

Page: 117 / 264

Printing data from a USB Flash memory drive (MFC-9320CW only)

101

Press

Black Start

Color Start

print the data.

IMPORTANT

• To prevent damage to your machine, DO

NOT connect any device other than a
digital camera or USB Flash memory drive
to the USB direct interface.

• DO NOT remove the USB Flash memory

drive or digital camera from the USB direct
interface until the machine has finished
printing.

Note

You can change the default settings for
Direct Print by using the control panel
when the machine is not in the Direct Print
mode. Press

Menu

to enter the

USB Direct I/F

menu. (See

Entering

text

on page 216.)

Printing data directly

from the USB flash

memory drive with

Secure Function

Lock 2.0 enabled

(MFC-9320CW only)

For more information about Secure Function
Lock 2.0, see Chapter 11 of the Network
User’s Guide on the CD-ROM we have
supplied.

Connect your USB Flash memory drive
to the USB direct interface (1) on the
front of the machine.
The

Direct

key will light up. Press

Direct

. Your machine will enter Direct

Print Mode.

The following message appears if
Secure Function Lock is on.

Access Denied

Press

to choose ID. Press

Enter the password. Press

Change ID
PIN:XXXX

Summary of Contents for MFC-9120CN









































































































































































































































































Search results

Summary of Contents for MFC-9120CN

Reviews:

Brother MFC-9120CN, User Manual, Page: 117 / 264

Search results

Summary of Contents for MFC-9120CN

Reviews: