Brother MFC-9100C, Owner'S Manual

Page: 40 / 217

O N - S C R E E N P R O G R A M M I N G 3 - 2
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between
the currently selected option, and a help message giving brief instructions
about how to proceed. The display you’ll probably see most often is
shown below, showing you, when you place a document in the feeder, that
you can dial a number and send a fax, or you can make a copy.
F A X : N O . & S T A R T
S C A N R E A D Y
C O P Y : P R E S S C O P Y
S C A N R E A D Y
Function Selection Table
You can probably perform most of these programming settings without
the Owner’s Manuals. To help you understand the function selections,
options and settings that are found in the MFC programs, use the Function
Selection Table below.
1. Fax Functions
1. INITIAL SETUP
Function Description Factory Set Page
1. TONE/PULSE Selects dialing mode. TONE 4-1
2. DATE/TIME Enter date and time for 2000 1/1 00:00 4-1
LCD display and heading
on transmissions.
3. STATION ID Program name, fax — 4-2
number and telephone
number to appear on
each transmitted page.
4. BEEPER Adjust volume level LOW 4-3
of beeper.
5. DELAYED TIMER Sets the time of day for 00:00 4-4
delayed faxes. You can
accept it or enter another
time when you scan each
fax into memory in
“Delayed Fax”
6. SPEAKER VOLUME Adjust speaker volume. LOW 4-4
7. RING VOLUME Adjust volume of ringer. LOW 4-4