Brother MFC 8600, Operation Manual

Page: 72 / 183

S E T U P S E N D 6 - 8
Contrast
If your document is very light or very dark, you might want to set the
contrast. Use S.LIGHT to send a very light document. Use S.DARK to
send a very dark document.
1
Insert the document, face down, in the feeder.
2
For the FAX, press
Function
,
3
,
3
.
For the MFC, press
Function
,
1
,
3
,
3
.
3
Use or to select AUTO, S.LIGHT or S.DARK and press
Set
.
4
Press
1
if you want to select additional settings. The display returns to
the SETUP SEND menu—OR—Press
2
if you are finished choosing
settings, and go to step 5.
5
Enter a fax number and press
Start
to send a fax.
Resolution
When you have a document in the feeder, you can use the
Resolution
key to
change the default setting. Press Resolution continuously until you see the
lights change to the setting you want. For standard, turn Fine & S.Fine
lights off. For Photo, turn them both on. (See Multiple Resolution
Transmission, page 6-12.)
Standard—Suitable for most typed documents.
Fine—Good for small print; transmits a little slower than standard
resolution.
Super Fine—Good for small print or artwork; transmits slower than fine
resolution.
Photo—Use when document has varying shades of gray; slowest
transmission time.
Canceling a Job While Scanning the Document
You can cancel a job while you are scanning it into memory by pressing
Stop
. Eject the document by pressing
Stop
again.