Chapter 6
6 - 5
Remote commands
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your Remote Access Code (3 digits followed by
), the system will
give two short beeps and you must enter a remote command.
Remote commands
Operation details
95
Change the Fax Forwarding or
Fax Storage settings
1 OFF
You can select
Off
after you have retrieved or erased all your
messages.
2 Fax Forwarding
If you hear one long beep, the change has been accepted. If
you hear three short beeps, you cannot change it because the
conditions have not been met (for example, registering a fax
forwarding number). You can register your Fax Forwarding
number by entering 4. (See
on page 6-6.) Once you have registered the number,
Fax Forwarding will work.
4 Fax Forwarding number
6 Fax Storage
96
Retrieve a fax
2 Retrieve all faxes
Enter the number of a remote fax machine to receive stored fax
message(s). (See page 6-6.)
3 Erase faxes from the memory
If you hear one long beep, fax messages have been erased
from the memory.
97
Check the receiving status
1 Fax
You can check whether your machine has received any faxes.
If yes, you will hear one long beep. If no, you will hear three
short beeps.
98
Change the Receive Mode
1 External TAD
If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90
Exit
Press
90
to exit Remote Retrieval. Wait for the long beep, then
replace the handset.
