Brother MFC 5490CN - Color Inkjet - All-in-One, Service Manual

Page: 428 / 439

App. 4-63 Confidential
• Selectors 3 through 7: Checking of the specified character code set when displaying or printing
the folder/file names stored in memory cards or USB flash memory drives
Setting these selectors to "0, 0, 0, 0, 0" does not check any character code set. When folder/
file names stored in memory cards or USB flash memory drives contain Chinese
characters, for example, those characters may get garbled in displaying on the color LCD
or printing indexes. If it happens, select the character code set of the language in use with
these selectors.
• Selector 8: Improvement of DTMF detection function (to minimize the effects of momentary
power failure or noise)
When DTMF cannot be detected due to a momentary power failure or noise, try to use this
selector.
WSW60
(Function setting 25)
sec.: second(s), ms: millisecond(s)
Note: Selectors 2 and 3 are applicable to models with touch panel.
Note: Selectors 4 and 5 are applicable to Japanese models when caller ID service is available.
• Selectors 2 and 3: Key repeat start time and interval for the touch panel
(Not used.)
These selectors specify the key repeat start time and interval for the touch panel.
The time (in seconds) specified by these selectors apply to both the key repeat start time
and interval. If these selectors are set to "0, 0," however, the key repeat start time is 0.5
second, but the interval is changed from 0.5 second that applies to the first 2.5 seconds to
0.2 second that applies after the first 2.5 seconds.
Selector
No.
Function Setting and Specifications
1 Not used.
2
3
Key repeat start time and interval
for the touch panel
(Not used.)
No. 2 3
0 0 : 0.5 sec.
0 1 : 1.0 sec.
1 0 : 1.5 sec.
1 1 : 2.0 sec.
4
5
Adjustment of temporary
connection timing of Caller ID
(Not used.)
No. 4 5
0 0 : No adjustment (default)
0 1 : Fast
1 0 : Standard
1 1 : Slow
6
Output of CNG detection result to
the activity report
0: Disable 1: Enable
(default)
7
8
Delay time from detection of a line
polarity reversal until permission of
polarity reversal interrupt
No. 7 8
0 0 : 500 ms
0 1 : 750 ms
1 0 : 1000 ms
1 1 : 1500 ms