23 - 8
TROUBLESHOOTING AND ROUTINE MAINTENANCE
Received colour fax prints only
in black and white.
Replace the colour ink cartridges that are empty or nearly empty, and
then ask the other person to send the colour fax again. (See
Replacing
the ink cartridges
on page 23-20.) Check that Fax Storage is set to OFF.
(See
Setting Fax Storage
on page 8-1.)
Left and Right margins are cut
off.
Turn on Auto Reduction. (See
Printing a reduced incoming fax (Auto
Reduction)
on page 5-7.)
Phone Line or Connections
The MFC does not answer
when called.
Make sure the MFC is in the correct receiving mode for your setup. (See
Basic receiving operations
on page 5-1.) Check for a dial tone. If
possible, call your MFC to hear it answer. If there is still no answer,
check the telephone line cord connection. If there is no ringing when you
call your MFC, ask your telephone company to check the line.
Sending Faxes
Poor sending quality.
Try changing your resolution to
FINE
or
S.FINE
. Make a copy to check
your MFC’s scanner operation.
Transmission Verification
Report says ‘Result:NG’ or
‘Result:ERROR’.
There is probably temporary noise or static on the line. Try sending the
fax again. If you send a PC FAX message and get ‘Result:NG’ or, on the
Transmission Verification Report, your MFC may be out of memory. To
gain extra memory, you can turn off Fax Storage (See
Setting Fax
Storage
on page 8-1), print fax messages in memory (See
Printing a fax
from the memory
on page 5-10) or cancel a Delayed Fax or Polling Job
(See
Cancelling a scheduled job
on page 6-12). If the problem
continues, ask the telephone company to check your phone line.
Vertical black lines when
sending.
If the copy you made shows the same problem, your scanner is dirty.
(See
Cleaning the scanner
on page 23-19.)
Handling Incoming Calls
MFC ‘Hears’ Voice as CNG
Tone.
If your MFC is set to Fax Detect ON, it is more sensitive to sounds. Your
MFC may mistakenly interpret certain voices or music on the line as a
calling fax machine and respond with fax receiving tones. Deactivate the
fax by pressing
Stop/Exit
. Try avoiding this problem by turning Fax
Detect to OFF. (See
Fax Detect
on page 5-6.)
Sending a Fax Call to the
MFC.
If you answered at the MFC, press
Fax Start
and hang up immediately.
If you answered on an extension phone, press your Remote Activation
Code (default setting is (
51). When your MFC answers, hang up.
DIFFICULTY
SUGGESTIONS
