manualshive.com logo in svg

Brother MFC-4820C, User Manual

Share
Download
Brother MFC-4820C User Manual Download Page 179

PRINTER DRIVER SETTINGS   

14 - 8

Copies

The 

Copies

 selection sets the number of copies that will be printed 

(1 to 999).

Collate

With the 

Collate

 check box selected, one complete copy of your 

document will be printed and then repeated for the number of copies 
you selected. If the 

Collate

 check box is not selected, then each 

page will be printed for all the copies selected before the next page 
of the document is printed.

Reverse Order

Reverse Order

 prints the pages of your document in the opposite 

order.

Near Edge Print

Near Edge Print

 feature expands the printable area at the bottom 

edge of the paper up to 0.5 mm. Print time will be slightly slower. 
Available for 

Letter, A4, Postcard and Index Card paper

. 

Not available for transparencies.

Summary of Contents for MFC-4820C










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands