3-10
3.3.9 Disassembling the Dial Switch Holder Assy B
1.Pull the plate spring in the direction of the arrow. Remove dial switch B.
2.Remove the two leaf switch R/L screws. Remove the leaf switch R assy (red
CN2) and the leaf switch L assy (white CN3).
Dial switch B
Leaf switch R/L screws
Leaf switch R/L assy’s
Plate spring
Fig. 3.3-14 Disassembling the Dial Switch Holder Assy B (1)
3.Remove the slide plate spring screw. Remove the plate spring.
4.Lift the slide plate 1B diagonally upward. Disengage slide plate 1B from the hook
and remove it.
Slide plate spring screw
Slide plate 1B
Plate spring
Fig. 3.3-15 Disassembling the Dial Switch Holder Assy B (2)
Summary of Contents for LX-200
