LK3-B438E Mark II
15
CAUTION
q
e
w
q
3-17 . Installing the motor cover
1. Install the motor cover
q
to the motor back cover
w
with the screws
e
and the flat washers
r
.
2. Pass the motor shaft through the notch in the mo-
tor back cover
w
, and then tighten the screws
y
and the washers
u
so that the clearance between
the motor pulley
t
and the motor cover
q
is
uniform.
3-18 . Installing the spool stand
Assemble the spool stand
q
while referring to the
spool stand instruction manual, and then install the
spool stand
q
at the right side of the work table.
3-20 . Installing the eye guard
Attach all safety devices before using the
sewing machine.
If the machine is used without these de-
vices attached, injury may result.
Install the eye guard assy
w
to the face plate
q
with
the two screws
e
.
3. INSTALLATION
w
q
e
r
t
y
u
q
3-19 . Installing the button tray
1. Install the button tray holder
q
with the two flat
wood screws
w
at a place convenient for opera-
tion.
2. Insert the button tray
e
into the button tray holder
q
, and secure them wiith the screw
r
.
w
e
r
