manualshive.com logo in svg

Brother HL-2600CN Series, Technical Reference Manual, Page: 447 / 491

Share
Download
Brother HL-2600CN Series Technical Reference Manual Download Page 447

2009/06/29 

APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 4 

2. 

HOW TO READ THE CARD COMMANDS SPECIFICATION 

Each command is described in the following four sections of this manual. 

 

2.1 Commands 

Command data sequences and syntax. 

ESC or CR stands for 0x1b or 0x0d as follows; 

ESC ----0x1b 
CR ---- 0x0d 

 
 

2.2 Available 

Devices 

The supported memory card devices which can be used for each command are represented in this manual 
using the abbreviations as follows. 

 

Abbreviation Device 

Type 

F 

Flash memory card (HL-1660e/2060/2400C/2400Ce/3400CN/ 
2600CN/3450CN) 

A 

ATA flash memory card  
(HL-1660e/2060/2400C/2400Ce/3400CN/2460/3260N/7050/2600CN/ 
3450CN/6050/6050D/6050DN/8050N/2700CN) 

H 

Internal IDE HDD (HL-2400C/2400Ce/3400CN/2460/3260N/7050/ 
2600CN/3450CN) 

I 

Internal flash memory (HL-1650/1670N/1270N/1470N/1850/1870N/ 
5070N/5170DN/6050/6050D/6050DN/5270DN/5280DW/5380DN) 

 
 

2.3 Description 

The detailed description about each command with command structure and syntax. 

 
 

2.4 Error 

Possible errors that may occur during cards operations. 

 

Summary of Contents for HL-2600CN Series












































































































































































































































































































































































































































































































Reviews:

No comments