manualshive.com logo in svg

Brother HL-2600CN Series, Technical Reference Manual, Page: 271 / 491

Share
Download
Brother HL-2600CN Series Technical Reference Manual Download Page 271

2009/06/29 

CHAPTER 5 PJL - 71 

7.7. USTATUSOFF 

Command 

The 

@PJL USTATUSOFF

 command makes all unsolicited status reporting inactive. 

Syntax  

@PJL USTATUSOFF [<CR>]<LF> 

 

Parameters  

There are no parameters for this command. 

 

Example  

<ESC>%-12345X@PJL <CR><LF> 
@PJL USTATUSOFF <CR><LF> 
@PJL USTATUS DEVICE = ON <CR><LF> 
<ESC>%-12345X 

 

7.8. JOB 

Recovery 

You can recover a failed job with the combination of 

JOB

 and 

EOJ

 commands and the 

USTATUS PAGE

 

command.  

JOB/EOJ

 commands inform the printer of the beginning and ending of each job and the 

USTATUS PAGE

 command informs the application of completion of printing of each page of a job. 

When the spooler finds a job failure,  it can recover the failed job.  It can send the 

JOB

 command with the 

START option.  The START page should be set to the last printed page, which can be found by the 

USTATUS PAGE

 command. 

 

Summary of Contents for HL-2600CN Series












































































































































































































































































































































































































































































































Reviews:

No comments