Brother HL-2600CN Series Technical Reference Manual Download Page 288

Page: 288 / 491

2009/06/29

CHAPTER 6 EPSON - 13

Enable out-of-paper sensor

Esc9 (27)(57)

<1Bh><39h>

The printer ignores this command.

Disable out-of-paper sensor

Esc8 (27)(56)

<1Bh><38h>

The printer ignores this command.

6.2. Page set up

Set page length

EscC

(27)(67)n

<1Bh><43h>n

This command sets the page length in lines.

EscCNULn (27)(67)(00)n

<1Bh><43h><00h>n

•

This command sets the page length in inches.

•

The top of form position is set to be the current line.

•

is the number of lines that make up one page, or the length of the page in inches, according to

which form of the command is used.

•

If the first form of the command is used (

= the number of lines in the page) the current line spacing

setting is used to determine the length of the page.

•

If the first form of the command is used,

must be in the range 1 to 127.

•

If the second form of the command is used (

= page length in inches),

must be in the range 1 to 14.

LPRINT CHR$(27); CHR$(67); CHR$(40); '40 lines per page
LPRINT CHR$(27); CHR$(67); CHR$(0); CHR$(11); '11 inches per page

Set left margin

Escln (27)(108)n

<1Bh><6Ch>n

•

This command sets the left margin in columns from the left edge of the page. The width of a column
is the current character width.

•

In proportional spacing mode a column width of 1/10" is adopted.

•

This command clears all tab settings.

•

The minimum space allowed between the left and right margins is 1/5".

LPRINT CHR$(27); CHR$(108); CHR$(10); 'Left margin 1" at 10 cpi

Set right margin

EscQn (27)(81)n

<1Bh><51h>n

•

This command sets the right margin in columns from the left edge of the page. The width of a
column is the current character width.

•

In proportional spacing mode a column width of 1/10" is adopted.

•

This command clears all tab settings.

•

The minimum space allowed between the left and right margins is 1/5".

LPRINT CHR$(27); CHR$(81); CHR$(72); 'Right margin 6" at 12 cpi

Set perforation skip

EscNn (27)(78)n

<1Bh><4Eh>n

•

This command sets the bottom margin and enables perforation skip, that is, whenever the print
position reaches the bottom margin the printer performs a page eject and moves the print position to
the top of the next page.

•

= the number of lines at the current line spacing setting between the bottom margin and the bottom

edge of the paper.

•

must be in the range 1 to 127.

•

Esc C

(Set Page Length) and

Esc O

(Cancel Perforation Skip) cancel automatic perforation skip.

Summary of Contents for HL-2600CN Series












































































































































































































































































































































































































































































































Search results

Summary of Contents for HL-2600CN Series

Reviews:

Brother HL-2600CN Series, Technical Reference Manual, Page: 288 / 491

Search results

Summary of Contents for HL-2600CN Series

Reviews: