manualshive.com logo in svg

Brother HL-2600CN Series, Service Manual

Share
Download
Brother HL-2600CN Series Service Manual Download Page 371

A-24 

IBM CHR SET MODE 

IBM E1H = Beta   

Places ‘Beta’ on E1h of the IBM character set. 

IBM E1H = Esszet *   Places the character of ‘Esszet’ on E1h of the IBM 

character set. 

 

 

W BOLD ON/OFF 

The application software is provided for the dot printer, which reprints the 
character onto the same position to make the bold font.  On the other hand, the 
laser printer detects the reprinted character and converts it to the bold font.  After 
the HL-8V model, however, the function has caused that print speed gets slow in 
the FX and XL emulations.  Therefore the setting is added, which selects to 
implement the function or to print fast without using the function. 

 

W BOLD = OFF *   

Not converts the reprinted character to the bold font in the 
FX and XL emulations. 

W BOLD = ON 

Converts the reprinted character to the bold font in the FX 
and XL emulations. 

(The print speed is decreased.) 

 

 

DLFNT Bd / It 

Brother has an original function such that the printer creates the bold font when 
receiving the command of the bold font which the printer does not have.  If the 
download font is selected by ID, however, the bold font which has been specified 
before can remain in the printer so that the download font is printed in bold. 

Though the function was deleted from the printer for the mean time, it also 
caused the claims. Therefore the setting which deletes the function is added. 

 

DLFNT Bd / It = YES  Creates the bold or italic font from the download font. 

DLFNT Bd / It = NO *  Not creates the bold or italic font from the download font. 

 

 

B PROD ON/OFF 

B PROD = ON* 

Creates the bold or italic font from the bitmap font. 

B PROD = OFF 

Creates the bold or italic font from the bitmap font. 

 

 

CONDENCE SELECT 

The condensed font is printed at 16.66cpi in the dot printer emulation for the 
Brother laser printers in conjunction with that the 16.66cpi font is used.  However, 
some customers need the same pitch with the one of the dot printer, and many 
customers still use the printer at 16.66cpi on the other hand.  Therefore the 
setting which selects the pitch of the condensed font is added. 

 

CONDENCE = 16.66p *  

Sets the pitch of the Epson/IBM condensed character 16.66cpi. 

CONDENCE = 17.14p 

Sets the pitch the Epson/IBM condensed character 17.14cpi. 

Summary of Contents for HL-2600CN Series


































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands