Brother HL-2600CN Series, Service Manual

Page: 293 / 385

9,,,
2.2 Engine Controller Mode
The Ready LED is lit, and applicable messages appear on the liquid crystal display (LCD)
in the following cases;
1) Consumables require to be replenished.
2) Waste toner pack is full of waste toner.
3) Paper jam.
4) Periodic maintenance.
5) Maintenance work being incomplete.
The above cases are not regarded as a breakdown, and should be treated in accordance
with Table 8-2;
Table 8-2
Display Message Meaning Countermeasure
12 0(',$ 833/2:
No paper in the upper
cassette / lower
cassette
Replenish paper.
&+. 0(',$
833/2:
Inconsistency of
media
Change media.
12 75$< 833/2:
No upper / lower
media cassette
Install cassette(s).
5(3/$&( 721(5
<0&.
Toner (Y, M, C, K)
empty Replace with new toner
cartridge(s).
&+(&. :$67(
721(5
Waste toner pack full
of toner Replace with a new waste
toner pack.
&+(&. )86(5 2,/
Change the oil bottle Replace with a new oil bottle.
&+. &/($1,1*
52//(5
Change the fuser
cleaner Replace with a new fuser
cleaner
0,635,17
3$3(5355(40(',$
Misprinting occurred
Confirm status of media
cassette.
Confirm correct paper size.
Confirm consistency of
media.
$/,*1 721(5 &*
<0&.
Toner cartridge not
installed Confirm the installation of the
toner cartridge(s).
$/,*1 )8 81,7
Fusing unit not
installed
Remove the fusing unit and
refit it. Confirm it is correctly
installed.
$/,*1 %(/7 &*
OPC belt cartridge not
installed Confirm the installation of the
OPC belt cartridge.
0(',$ -$0 )(('
Paper jam at feeding
area
Remove the media cassette,
and remove paper jammed at
feeding entrance.
0(',$ -$0 ,11(5
Paper jam inside
printer Open the transfer unit 2, and
remove paper jammed inside.