Brother HL-2600CN Series, Service Manual

Page: 239 / 385

VII-27
4.2.11 WT Holder ASSY 2
1) Open the front cover 2.
2) Remove the waste toner box.
3) Remove the set screw BT3X8 (1 pc.) to remove the cover (FR) by pulling the cover
(FR) forwards to release the lower hook.
4) Remove the set screw ST3X6 (1 pc.) to remove the WT holder ASSY 2 from the
frame.
Fig.7-37
4.2.12 Developer Clutch 2 (C, M, Y, K)
1) Remove the outer plastic C ring of each developer clutch 2 from the shaft.
2) Pull out the developer clutch 2 from the shaft.
Fig.7-38
Plastic tube
WT holder ASSY 2
Front cover 2
Cover (FR)
Lower hook
Developer clutch 2
C ring