manualshive.com logo in svg

Brother HL-1660 Series, User Manual

The Brother HL-1660 Series is a high-quality printer featuring advanced technology and exceptional performance. To ensure easy maintenance and repairs, download its comprehensive Parts Reference List manual for free via our website. Enhance your printing experience by accessing this user-friendly manual at manualshive.com.

Share
Download
background image

USER’S GUIDE

7–18

■

 Dropout

If nothing or part of a page is printed, make sure that the toner cartridge is
not empty or the toner is evenly distributed in the cartridge. Take the
proper action, referring to 

“Unclear Printouts” in this section

.

Also, make sure that you use paper, OHP films or envelopes that meet
specifications. Moist paper causes this problem.

If the print density is set too low, this problem may occur. Adjust the
print density to the proper setting. See 

“Checking the Printed Test Pattern

or Font List” in Chapter 2.

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucky in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucky in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucky Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Fig. 7-16  Dropout

■

 Poor Halftone or Grayscale Transitions

If images do not have smooth transitions as gray shades gradually change,
turn off the high resolution control (HRC SETTING) in “RESOLUTION
MODE” with the MODE switch.

HRC = OFF HRC = MEDIUM

Fig. 7-17  Adjustment of High Resolution Control

Summary of Contents for HL-1660 Series

































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for HL-1660 Series

D-Link DP-300+ User Manual preview
DP-300+
Brand: D-Link Pages: 38
D-Link Epress EtherNetwork DP-301P+ Datasheet preview
Epress EtherNetwork DP-301P+
Brand: D-Link Pages: 2
Oki MPS4200mb Safety Information Manual preview
MPS4200mb
Brand: Oki Pages: 40
Oki ML620 Manual De L'Utilisateur preview
ML620
Brand: Oki Pages: 104
Oki OKIOFFICE84 Garantie, Réglementation Et Spécifications preview
OKIOFFICE84
Brand: Oki Pages: 28
Oki OKIOFFICE84 Garantia, Informações Normativas E Especificações preview
OKIOFFICE84
Brand: Oki Pages: 23
Oki ML620 Guía Del Usuario preview
ML620
Brand: Oki Pages: 108
Oki ML620 Specifications preview
ML620
Brand: Oki Pages: 2
Oki ML490 Series Manual Do Usuário preview
ML490 Series
Brand: Oki Pages: 94
Oki ML490 Series Maintenance Manual preview
ML490 Series
Brand: Oki Pages: 135
Oki ML420 Series Manual Do Usuário preview
ML420 Series
Brand: Oki Pages: 97
Oki PRO330S User Manual preview
PRO330S
Brand: Oki Pages: 280
Oki ML320 Turbo Guía Del Usuario preview
ML320 Turbo
Brand: Oki Pages: 123
Oki Pacemark PM4410 Manual De L'Utilisateur preview
Pacemark PM4410
Brand: Oki Pages: 144
Oki Pacemark PM4410 Safety & Warranty preview
Pacemark PM4410
Brand: Oki Pages: 28
Oki MPS480mb User Manual preview
MPS480mb
Brand: Oki Pages: 176
Raise3D PRO2 Series Quick Start Manual preview
PRO2 Series
Brand: Raise3D Pages: 32
Canon Pixma TS7700i Series Manual preview
Pixma TS7700i Series
Brand: Canon Pages: 554

Brands by name

Popular brands

Load more brands