Brother HL-1660 Series User Manual Download Page 119 | Manualshive

Page: 119 / 448

background image

II

Trademarks

Brother is a registered trademark of Brother Industries, Ltd.

Apple and LaserWriter are registered trademarks, and TrueType is a trademark of
Apple Computer, Inc.
Centronics is a trademark of Genicom Corporation.
EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of Seiko
Epson Corporation.
Hewlett-Packard, HP and PCL are registered trademarks, and HP LaserJet 5, HP
LaserJet 4+, HP LaserJet Plus, HP LaserJet II, HP LaserJet IID, HP LaserJet IIID,
HP-GL, HP-GL/2, and Bi-Tronics are trademarks of Hewlett-Packard Company.
IBM, Proprinter XL, Proprinter, and IBM/PC are registered trademarks of
International Business Machines Corporation.
Intellifont is a registered trademark of AGFA Corporation, a division of Miles,
Inc.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.
Windows is a registered trademark of Microsoft Corporation in the United States
and other countries.
PostScript is a registered trademark of Adobe Systems Incorporated.

All other brand and product names mentioned in this user’s guide are registered
trademarks or trademarks of respective companies.

Compilation and Publication

Under the supervision of Brother Industries Ltd., this manual has been compiled
and published, covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to
change without notice.

Brother reserves the right to make changes without notice in the specifications
and materials contained herein and shall not be responsible for any damages
(including consequential) caused by reliance on the materials presented, including
but not limited to typographical and other errors relating to the publication.

©1997 Brother Industries Ltd.

Shipment of the Printer

If for any reason you must ship your Printer, carefully package the Printer to avoid any
damage during transit. It is recommended that you save and use the original packaging. The
Printer should also be adequately insured with the carrier.

WARNING

When shipping the Printer, the TONER CARTRIDGE must be removed from the Printer.
Failure to remove the Toner Cartridge during shipping will cause severe damage to
the Printer and will VOID THE WARRANTY.

«
...
117
118
119
120
121
...
»

Summary of Contents for HL-1660 Series

































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for HL-1660 Series

CLP 510N - Color Laser Printer

Brand: Samsung Pages: 270

Bixolon SRP-270

Brand: Samsung Pages: 13

Brand: VASTEX Pages: 15

Brand: Xerox Pages: 5

Brand: JRC Pages: 44

Brand: TEC Pages: 89

Brand: Olivetti Pages: 24

Brand: IriSys Pages: 21

WorkCentre 7328

Brand: Xerox Pages: 8

Brand: Rapid Shape Pages: 44

Brand: Linux Pages: 8

Brand: MIMAKI Pages: 28

Brand: LulzBot Pages: 3

Brand: SPRT Pages: 21

Micro 3D Printer

Brand: m3d Pages: 10

Brand: Epson Pages: 277

Brand: Epson Pages: 288

Brand: Epson Pages: 283

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands