Brother HL-1240 User Manual Download Page 99

Page: 99 / 130

4-12

Others

Problem

Recommendation

The printer cannot print.
“There was an error
writing to BRPRT: (or
BRLPT1:) for the
printer.” error message
appears on your PC.

•

Check that the printer cable is not damaged or
broken.

•

If you have an interface switching device, make sure
the correct printer is selected.

•

Close the ‘Resource Manager’ and turn the printer
power switch off and on again.

For DOS users

Problem

Recommendation

Unable to print from
application software.

•

Check that the DOS application software interface
settings match that of your printer : for example, if
you are using a parallel printer cable, you would most
likely set your DOS software printer port to LPT1.

•

Check if the printer has any printer alarms active.

•

Check that the appropriate printer is selected in your
application software.

For Apple Macintosh Computer users

Problem

Recommendation

Unable to print from
application software.

•

Make sure that the supplied Macintosh printer driver
is installed in the System Folder and it is selected
with Chooser.

•

Check the PORT selection within the Chooser : It
should match the port to which you physically
attached the printer cable.

Summary of Contents for HL-1240



































































































































Search results

Summary of Contents for HL-1240

Reviews:

Related manuals for HL-1240

Brands by name

Popular brands

Brother HL-1240, User Manual

Search results

Summary of Contents for HL-1240

Reviews:

Related manuals for HL-1240

Brands by name

Popular brands