manualshive.com logo in svg

Brother HL-1240, User Manual

Share
Download
Brother HL-1240 User Manual Download Page 125

iv

Declaration of Conformity (For Europe)

We, Brother Industries, Ltd.,

15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan

declare that this product is in conformity with the following normative documents.

Safety: EN 60950 EN 60825
EMC: EN 55022 Class B EN 55024

EN 61000-3-2 EN 61000-3-3

following the provisions of the Low Voltage Directive 73/23/EEC and the
Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/263/EEC and
92/31/EEC).

Issued by:
Brother Industries, Ltd.
Printer Products Division

IEC 825 Specification (For 220–240 V Model Only)

This printer is a Class 1 laser product as defined in IEC 825 specifications.  The label
shown below is attached in countries where it is required.

CLASS 1LASER PRODUCT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT

This printer has a Class 3B Laser Diode which emits invisible laser radiation in the
Scanner Unit. The Scanner Unit should not be opened under any circumstances.

Summary of Contents for HL-1240



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands