manualshive.com logo in svg

Brother FAX-8650P, Owner'S Manual

Share
Download
Brother FAX-8650P Owner'S Manual Download Page 161

150

G L O S S A R Y

Cover Page  Prints a page at the other party’s machine, that contains the

sender and recipient’s name and fax number, number of pages and
comment. You can generate an electronic cover page at the other end
with pre-programmed information from memory or you can print a
sample cover page to fax with your document.

Cover Page Message  The comment that is on the Cover Page. This is a

programmable feature.

Delayed Transmission  Sends your fax at a later time (up to 24 hours

later).

drum unit  A printing device for your machine.

Dual Access  Your machine can scan outgoing faxes or scheduled jobs

into memory at the same time it is sending a fax or receiving or
printing an incoming fax.

ECM (Error Correction Mode)  Detects errors during fax transmission

and resends the page(s) of the document that had an error.

Electronic Cover Page  A preprogrammed cover page that is transmitted

from the machine’s memory, eliminating the need for making up
cover pages manually.

F/T Ring Time  The length of time the machine rings (when the answer

mode setting is Fax/Tel (F/T)) to notify you to pick up a voice call
that it answered.

Fax Forwarding  Sends a fax received in memory to another

preprogrammed fax number.

Fax Storage  You can store faxes in memory for remote retrieval.

fax tones  The signals sent by sending and receiving fax machines while

communicating information.

Fine Mode  Resolution is 196 x 203 dpi. It is used for small print and

graphics.

grey scale  The shades of grey available for copying and faxing

photographs.

group number  A combination of One Touch and/or Speed Dial

numbers that are stored on a One Touch key for Broadcasting.

Interrupt  Temporarily puts a waiting job on hold while you perform

another operation.

Journal  Lists information about the last 50 incoming and outgoing

faxes. TX means Transmit. RX means Receive.

Journal Period  The preprogrammed time period between automatically

printed Journal Reports. You can print Journal on demand without
interrupting this cycle.

Summary of Contents for FAX-8650P












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands